Hand balance podium with a wooden base

Voir plus de photosCacher les photosVoir toutes les photos

By ordering this item, you receive a podium composed of a wooden board, two canes, 2 double bases and a single central base, 2 wooden bricks and a storage bag .

Professional balance equipment:

It is a structure that folds completely flat to occupy minimal space and be easily transported.

The two double low bases are attached to the wooden base, which allows you 3 different cane spacings ranging from 34cm to 38cm. The third base is central. It allows a central balance position on one hand. You can optionally purchase a compatible kit equipped with a ball bearing to achieve 360° rotating balances ( not included in this kit ).

Acrobat podium video:

Characteristics of the wooden base:

Wood: 25mm thick plywood: precision cutting (CNC).
Width: 55cm.
Length: 58cm.
Thickness of the entire folded structure: 6cm.
Weight of the board alone with the low bases: 3.90Kg.
Weight of the complete kit: 7.5Kg.
4 flexible feet for good seating on the ground.

Characteristics of the rods:

Total height from the ground to the top of the wooden bricks: 58 cm. This is an optimal height suitable for the majority of acrobats.
Rod diameter: 1.80 cm.
Length of the canes (without the bricks): 53 cm.
Mass of a cane (without the brick): 1,050 Kg.

Characteristics of the bricks:

Width: 10 cm.
Length: 13 cm.
Thickness: 3 cm.
Mass of a brick (without the cane): 370 grams.

NetJuggler info:

The little extra that we appreciate : The possibility of having several different gaps as well as a base for a central position. We also appreciate that the whole thing folds up very neatly to be easily transportable. This is the kind of podium kit that can easily be transported from one training location to another. It can be brought as luggage by plane, train, etc.

For what type of practice?

The total height of 58cm is a height commonly used in acrobatics. This kit uses the same canes and bricks used on the Gerris podium. Compatible rods can therefore be interchanged between these two kits.

Maintenance information

On the base where the rod is positioned, the whole thing is held in place thanks to a bolt that can be seen in the photos. If you are regularly assembling and disassembling this part, it is necessary to be perfectly straight when tightening and loosening, otherwise you risk damaging the female thread on the base.

This problem can actually occur if the screwing is not carried out perfectly straight, in particular because we use high-end aluminum for the manufacture of the bases. The combination of bolt steel and aluminum can be sensitive, especially if tightening is not done carefully.

In terms of maintenance, you may need to redo the female thread directly on the base from time to time. This repair can be carried out by yourself if you have the necessary equipment, or in a cycle repair shop or car garage. If you have a friend who does DIY, they might be able to help you too.

I would like to point out that this type of repair is not covered by the warranty. However, thread maintenance is a relatively simple procedure that you may need to perform from time to time.