Light Kit for diabolo
Item sold in pairs to equip both sides of a diabolo.
Light kit for diabolo:
Equip your diabolo with light with this kit. It is compatible with many diabolos listed a little further down on this page.
This kit will have a more impressive effect on translucent diabolos .
Video of the light-up diabolo kit:
I made a short video explaining how to assemble the light kit on your diabolo. It's very simple but may not be obvious to everyone :-).
Diabolos compatible with this light kit:
- Diabolo Cyclone
- Diabolo Cyclone Quartz and Quartz V2 ( translucent diabolo )
- Play COMET Diabolo
- Harlequin Diabolo by Mister Babache
- Mister Babache Medium Harlequin Diabolo
- Diabolo Millenium by Mister Babache. Be careful though, you will need to add a washer on each side between the diabolo and the light kit for this kit to work with this diabolo model. Washers are not supplied with this kit.
- Diabolo Galaxy by Mister Babache. Be careful though, you will need to add a washer on each side between the diabolo and the light kit for this kit to work with this diabolo model. Washers are not supplied with this kit.
- Diabolo Jester
- Jester Diabolo with bearings
- Diabolo Jester XL
- Diabolo Vision
- Diabolo Vision free
Diabolos not compatible with this light kit:
This light kit does NOT work with the following diabolos:
- Hurricane diabolos marketed since October 2024 are no longer compatible with this light kit.
- Typhoon diabolos marketed since November 2024 are no longer compatible with this light kit.
- Henrys Diabolo Circus
- Diabolo Circus Free by Henrys
- Henrys Vision Diabolo ( translucent diabolo )
- Diabolo Vision FREE by Henrys ( translucent diabolo )
- The Finesse diabolo set from Mister Babache
- The Tornado diabolo by Mister Babache
- The Taibolo Diabolos
- Diabolo Sundia
- Hyperspin diabolos (the screw thread is not the same)
- The Epic Juggling diabolo: A DREAM.
How to equip your diabolo?
To mount this kit on your diabolo, you will first need to remove the bolts located on each side of your diabolo. A 10 spanner will be needed to do this. Be careful, on some diabolos the bolts are really very tight, I am thinking in particular of Henrys diabolos!
The light kit is actually assembled around a bolt, so you will replace the original bolts of your diabolos with the light kit. Tightening will be done by hand. Remember to tighten well otherwise your diabolo will come undone when you drop it on the ground! And yes, even the pros drop their diabolos!
Batteries for the light kit:
The kit is sold complete with batteries, there are 3 "button cells" in each kit. When you need to change the batteries, you will therefore need 6 AG13 type batteries which you can easily find in stores.
Equip yourself with a very small cross-head screwdriver to open the kit and replace your batteries. Remember to recycle your batteries . Button batteries are very easy to recycle. We are better at recycling button batteries than rechargeable batteries, for example!
A +++ review. I ordered the light kit by contacting the seller's site NetJuggler beforehand.
Very responsive and professional team. The kit's durability will remain to be seen.
I wanted to adapt the kit to a 500 diabolo from Décat... Which they don't offer. The person from NetJuggler was clear, took the time to measure the thread and called me back very quickly (information not available with Décat even if they are OK!)
I did a bit of DIY because the screw thread wasn't right: a well-fitting washer and it's OK, a luminous firework! My son is having a blast.
Good morning,
Is this kit compatible with Henry's Vision 2 diabolos?
There is no Henrys Vision 2 diabolo. Only the Henrys Vision diabolos and the Henrys Vision Free, which is the version of the Vision equipped with ball bearings. The Light Kit is compatible with both of these Vision diabolo models.
Good morning
Is the kit compatible with Jester XL diabolos?
THANKS.
This kit is compatible with the Jester XL diabolo.
Hello, is this light kit compatible with the Falcon diabolo?
Thank you for your reply...
As stated in the description, this model of light kit is not compatible with Sundia diabolos :-(
Good morning,
I've been trying to assemble this light kit with my translucent Hyperspin diabolo for 1.5 hours now.
I tried every way possible and unimaginable for my little diabolo beginner brain. The nut of the kit is wider than the nut of the diabolo, so you can't screw it directly onto it.
I also tried to put the hyperspin nut in the nut slot of the kit. But the screw of the diabolo axle does not reach the hyperspin nut because it is too short, so I cannot screw it in this way either...
Would it be possible to give me the solution, or even make a short video tutorial with hyperspin, because I don't think I would be the only one in this case.
Thank you in advance for your response!
Good morning, It is perfectly normal that you cannot fit this light kit to a Hyperspin diabolo. It is not compatible with Hyperspin diabolos. The Hyperspin diabolo has its own light kit, the Chameleon . This information is specified on the Hyperspin diabolo pages as well as on the page for this light kit.
Our phone number is always present on every page of our website. If you have any doubts or questions about the equipment, we will be happy to advise you. We try to be as precise as possible in our product descriptions, but I can completely understand that sometimes descriptions are not enough. It is not always easy to reproduce a physical store experience with the advice on a website, although our content writing teams make great efforts to describe the items and document them.
Is a translucent diabolo really better?
Light kit on translucent diabolo
A translucent diabolo lets light through and helps it diffuse better. There's no doubt that a translucent diabolo will look better when equipped with a light kit. On an opaque diabolo, the light will be more directional: towards the front and back of the diabolo.
Is it compatible with the Rubber King from Mister Babache?
A priori it is compatible with the Rubber King (90% sure). Not having one on hand, I just invite you to check that the Rubber King bolts come loose with a 10 wrench. If this is the case, then the kit is compatible.
I bought 3 pairs of these kits a year ago now, and at the time the A-dream was marked in the compatible diabolos, so I equipped myself with these kits on NetJuggler (in the end I was not able to put them on and I left them aside)...
And today, I go on NetJuggler and I see that finally the light kits are no longer compatible with the A-dream!
I find it a bit of a shame because I think I'm not the only one in this situation.
This is most likely an error on our part in our description of this item. We had to realize our mistake and intervene by amending the description. I sincerely apologize for the inconvenience. I invite you to contact us by phone or email so we can intervene.
great light kit easy to assemble I recommend
Is it compatible with the Sundia Shining diabolo?
Yes, Sundia diabolos are compatible with this light kit.
We just added it to the list. :-)
Hello, I would like to know if this kit is compatible with the Epic À Dream diabolo from Epic juggling because it is in the list of compatible diabolos but also in the list of non-compatible diabolos!! :-)
Thank you for your reply.
Indeed, we hadn't seen this error. The Epic A-Dream is not compatible with this light kit.
Hello, is it compatible with the Diabolomini Genius 105mm?
It may be compatible with the diabolo from the brand you mentioned. However, we cannot guarantee this. We assure our customers that we do not sell items from this brand.
is it compatible with big foot
Yes, it is compatible with the Big Foot.
Is it compatible with the Hurricane diabolo?
Yes, it is compatible with the Hurricane diabolo.
Is this kit compatible with the Cyclone Quartz V2 diabolo?
Yes, it is compatible with the Cyclone , Cyclone Quartz, and Cyclone Quartz V2 diabolos.
I installed my light kit on my translucent vision but I have the impression that it has lost performance, is this possible?
The light kit will make your diabolo heavier, which will make it spin differently. It's quite possible that you'll need some time to adapt, especially for tricks that require stick release.
Yes, I've gotten quite used to it, but even if the performance isn't the same, I find that the combination of translucent vision and light kit is really great :) I love it ;)
actually, I found where the performance problem came from: my rod was a little twisted but I managed to fix the problem, thanks anyway ;)
I can't assemble the two on the bolt
It's not complicated; simply disassemble the diabolo and slide the kit under the bolts. Contact us by phone so we can guide you.
Is it compatible with the A-dream diabolo?
Yes, it is compatible with the A-Dream.
My question is, is the light kit compatible with the Circus Free diabolo?
Yes, the kit is compatible with the Circus Free.
Is the Circus Free diabolo compatible with this light kit???????
Yes, the Circus Free is compatible with this light kit.
Is it compatible with the Vision Free diabolo?
Yes, the kit is compatible with the Vision Free diabolo.
the cyclone diabolo is very good
I have two Circus diabolos from Henrys, so I would like to know if it is better to buy the light kit or to buy the Lunar Spin Light-Up diabolo?
What do you think is best?
The light kit will have a limited effect when used with the Circus because the Circus shells are opaque. But the Circus diabolos are top-notch in terms of balance and ease of use. Let's just say that with the Lunar you'll have an excellent visual effect but you won't find the sensations of the Circus!
can we wet it
You can get it wet... But it's electronic, it won't survive swimming!!! Light kits don't like humidity!
No, we can't get it wet.
Is the kit compatible with the Hurricane diabolo?
YES
I would like to know the diameter of these kits to see if they fit my diabolo
And what about the Taibolos?
An upcoming version will be compatible with Taibolo! So keep an eye out!
Is this kit compatible with the Cyclone diabolo?
thanks in advance
Yes it is, you just have to read the list ;)
Is it compatible with the Eolo Diablos?
This is not compatible with Eolo diabolos or Funtrix diabolos which have thin axles.
OK thanks
Is it compatible with Mr Babache's Harlequin Medium?
Yes
Thank you, it is indeed indicated in the description of the article that this kit is compatible with the Arlequin Medium diabolo!
This kit is also suitable for the Harlequin diabolo (large) from Mister Babache
Yes, absolutely, this kit is compatible with the Mister Babache Arlequin (large) diabolo. It is also compatible with the Arlequin Medium diabolo.
Is it compatible with the G4 finesse diabolo?
oops sorry I just watched the video excuse me
oops sorry I just watched the video excuse me
When you say kit, is it for 1 or both sides of the diabolo?
That's right, I didn't specify! Good point! I'll add that to the description! When I say kit, you do indeed have two, one for each side of the diabolo.
I just rewatched the video! And that's the first thing I said: "When you order this kit, you get two [...]". Not good! You didn't pay attention to the video before asking your question! Grrr :-)