Oil lamp
Lamp sold individually. Fuel not supplied with the lamp.
This oil lamp is designed for fire artists. It has several practical advantages.
The lamp is small, so easy to transport, but the wick is large so it produces large flames.
The stand is stable, which prevents the lamp from falling or being wobbly. If you have a lot of lamps, you can recess all the legs so that they can be stored in a tight space.
There is a fill hole with a secure closure for easy and clean oil filling.
There is a nice cap to put out the fire easily and safely. It helps protect the wick during transportation, to keep everything clean and prevent fuel evaporation. This means you don't need to empty the lamps after every show, you can carry them with the oil inside, just make sure you keep them straight.
The design is really cool, it is an aesthetic source of fire on stage. If you are performing in the street, you can create your own scene with 8 to 12 lights, to delimit your stage space.
You can choose the copper colour or the silver colour.
Technical characteristics:
- Height of the lamp including the cap: 26cm.
- Foot height: 15cm.
- Diameter: 15cm.
- Weight of the lamp without fuel including foot: 680g.
- European standard - EN14059: 2002.
Use only lamp oil. NEVER USE BENZENE, GASOLINE NOR GAS !!! The lamp may explode!
Instructions for filling the lamp:
- To open it, hold down the upper tubular part of the lamp and unscrew it counterclockwise.
- Using a funnel, not supplied, fill the oil lamp reservoir.
- Do not fill near a flame.
- Be careful not to spill any oil. If you spill some, wipe it off with a cloth.
- Make sure there is no water in the tank.
- Make sure that the wick does not protrude more than one centimeter from the wick holder.
- Close it by screwing the wick in place by turning clockwise while maintaining downward pressure.
Lighting the lamp:
- Let the wick absorb the fuel for 5-7 minutes before lighting.
- Remove the cap (flame stopper supplied) and light the wick with a lighter or a long match.
- If the flame is too high or if it produces too much smoke, turn off the flame and wait for the assembly to cool before adjusting the wick.
Turning off the torch:
- Place the cap on the flame until the flame is extinguished. If you lose the cap, cover the flame with a non-flammable object (so as to smother the flame).
- Do not touch the cap until the whole has had time to cool completely. The lamp will take a while to cool down.
- Wait until the lamp has cooled off completely before moving or storing the lamp.
Safety instructions:
- Never use gasoline, kerosene or flammable liquids.
- Keep away from children and pets.
- WARNING: For children, a very small amount of fuel ingested can be fatal - even just putting the wick in your mouth can be.
- WARNING: If fuel is swallowed, do not induce vomiting, seek medical attention immediately or contact a poison control center and show them these warnings and those on the bottle of your fuel .
- WARNING: Keep this lamp out of the reach of children both during use and when stored.
- For OUTDOOR use only.
- Keep the flame out of the reach of flammable objects.
- Do not carry the lamp when it is on or still hot.
People who bought this item also bought the following items
Flame-shaped fire fans
Flame-shaped fire fans. Black fans, for a striking effect onstage.
Siam Flash: 1Kg
Upon contact with a flame, the Siam Flash generates a huge ball of fire. Striking effect.
pour le combustible, peut on mettre du pétrole à la place de l'huile?
Merci