Unicycle toolbox

Complete set of unicycle tools in its transportable box.

Qu-ax toolkit:

All the tools necessary for the maintenance of your unicycle.

Content of the toolbox:

• A crank extractor.
• Four Allen keys.
• A tube cutter.
• A bearing puller.
• A 17/19 rubber coated open end wrench.
• A pair of tire changers.
• A ratchet screwdriver with a size 10 socket.
• A spoke wrench.
• A Qu-ax toolset.
• All in a small carrying case.

Crank puller:

As on a bicycle, the crank of a unicycle is put in place by force and it is therefore impossible to remove without a puller. The larger part which is threaded slips into the hole in the crank. The bolt is then turned using the spanner to loosen the crank, it is then easy to finish removing the crank by hand. Extractor compatible with square-shaped cranks and with Isis cranks.

Set of Allen keys:

Each Allen key is indexed by colour. They all have a rounded head on the long side for hard-to-reach bolts.

Flat key 15 / 17:

On a unicycle, this key can be used for the pedals (15). And for the crank puller.

Tire changer:

Each tire lever of this model is reinforced with an internal metal structure.

10 ratchet spanner:

For the bolts that hold the fork to the wheel. The ratchet simplifies the installation of the bolts. The ratchet will provide comfort and efficiency if you often have to assemble/disassemble your unicycle(s).

Bearing extractor:

Bearing puller with extra thin claws (important for removing Q-Axle-disc type hubs.

Tube Cutter:

To shorten your seat post or any other tube you can get hold of!

Spoke wrench:

A spoke wrench is used to adjust the spoke tension of your unicycle wheel. The spokes are the metal rods that rest on the rim at the hubs. They can loosen over time, which can cause performance or safety issues. The spoke wrench allows you to tighten or loosen the spokes to keep the wheel in optimal condition.