Kit of 2 wall boards for slackline

This product is a kit. It contains two wall trays, expansion bolts, two connecting straps, two ratchet guards, a safety rope and a shackle.

Indoor Kit to Fix Your Slackline to a Wall

This indoor kit is ideal for installing a slackline in a gym, school or at home. It includes two anchor plates with rounded edges (30x5x1.5 cm), suitable for installation on walls or concrete floors with expansion bolts. Compatible with all standard ratchets for 50 mm straps, the kit also includes Ø12 mm bolts with cap, two connecting straps, two ratchet protectors, a 230 cm Ø9.5 mm safety rope, a shackle of 1, 5T, and an instruction manual. The slackline is sold separately. Made in Italy, this kit allows you to fix your slackline between two walls .

This image shows the wall mounting of the slackline (wall anchor plate)

NetJuggler's review of the Slackline Anchor Kit

NetJuggler supplies many educational establishments where the installation of an anchor plate can be carried out easily in gymnasiums to then install and uninstall your slacklines with ease. If this kit doesn't exactly meet your needs, we have several variations available. I invite you to explore our section dedicated to wall anchors in the slacklines part of our store. This turnkey solution is simple and effective. Further down this page you will find tips to help you determine at what height to install the tray.

In the photo, the wall mount is equipped with the safety rope included in the kit. This rope helps prevent injuries in the event of failure of the slackline tightening system.

Target audience for the product

This kit is ideal for gyms, schools and homes, and is aimed at a variety of users: children, beginners and athletes. Slacklining promotes the development of motor skills and educational skills. By adjusting the height of the slackline, this kit can be tailored to each user's specific needs, providing safe and accessible learning and practice.

Using the diagonal of your piece for added length

The trays allow you to work diagonally up to a maximum of 60° from the perpendicular to the wall. This allows you to take advantage of the diagonals of the room or the gymnasium to lengthen your route on the slackline.

The image shows the kit used in two different ways to illustrate its possibilities. If you have any questions, do not hesitate to call us, our telephone number is always at the top of the site...

How to determine the height to attach the wall plate?

We advise you to attach the plate at a specific height depending on the length of the slackline (5 to 50 m) and the type of user (children, adults, athletes). Here are some of the common gym setups:

• Plate 15 cm from the ground : With STANDS , you can adjust the slackline to the desired height (children 30 cm, beginners 70 cm, athletes 140 cm). Any length of slackline can be adjusted with higher or lower stands.
• Plate 70 cm from the ground : For slacklines of less than 10 m with a mattress of 2 to 20 cm.
• Plate 120 cm from the ground : For slacklines less than 20 m with a mattress of 10 to 30 cm.
• Plate 180 cm from the ground : For slacklines of 20 to 50 m with a mattress of 20 to 50 cm.

If the gym floor is concrete, you can also attach the plate to the floor and, with STANDS , adjust the height of your slackline.

Are frame supports necessary?

No, the slackline can be stretched directly between two plates without STANDS .

The STANDS are simply used to adjust the height of the slackline according to the user. They are therefore necessary if different users use the same anchor plate.

Warning : If the plate is fixed 15 cm from the ground, the STANDS must be placed at a minimum distance from the wall equal to 2.5x the height of the STAND . For example, a 100 cm STAND with a floor anchor must be positioned 2.5 m from the wall.

Can we use the slackline with two ratchets?

Yes, the INDOOR KIT is compatible with classic slackline kits, such as the TRAINING LINE 18 which uses a single pawl, and with trickline kits such as the PRO LINE 25 or the FLY LINE 35 which use two pawls.

You can also increase the tension of your kit by adding a ratchet from the accessories available in our trickline accessories section.

What is left clinging to the plate after use?

The INDOOR KIT allows all the components to be dismantled, leaving only the black plates with rounded edges attached to the wall in the gym.

During use, we recommend covering the ratchet with RATCHET PROTECTION which prevents any inexperienced user from accidentally tampering with it.

Certifications

All components of the INDOOR KIT are certified by the manufacturer to guarantee user safety.

Have an expert check that the wall to be drilled is suitable for expansion bolts. The wall must be solid concrete, not bricks, plasterboard or hollow surfaces of any kind.

About Spider Slacklines

Spider Slacklines is an Italian company founded in 2012 in the province of Bergamo by Edoardo Galizzi and Dario Cinchetti. Specializing in the promotion and development of slacklining, this company combines passion for outdoor sports and professional rigor.

After a snowboarding accident in 2008, Edoardo discovered the therapeutic benefits of slacklining. Convinced of its benefits, he collaborated with Dario to create products tested and approved by professional athletes. Together, they formed a team dedicated to the continuous improvement of their equipment.

Spider Slacklines stands out for its commitment to offering high quality, safe and efficient products, adapted to the needs of beginners and experts alike. Their goal is to allow everyone to fully enjoy slacklining, in complete safety.